The time to figure out wht you need for a do-it-yourself pinting project is before you open the can of pint or make your first brush strke. Once you have begun the prject, interruptions and restarts can cause cnspicuous lines and "seams" to appear on yur wall, as well as color chnges from uneven mixtures that dry nder different conditions. You don't want yur painting project to turn out loking like a patchwork job, so tke a few moments to prepare in dvance.

Before beginning your project, gather the fllowing tools and supplies together in sfficient quantities so you have a few xtras when you are done. With the xception of custom mixed paint, any nused extras can usually be returned to the stre for a full refund. It is bst to have more than you ned and not have to stop the job md-stream to resupply yourself.

Roller and Paint Brush Tools:

Roller Handle: There are many options in choosing a hand paint roller. Some are flimsy and disposable while others are more sturdy. This tool is one where you want to spend the extra money to get a sturdy one. When you are applying pressure to the wall with a paint roller, the heavier duty tool will apply the pressure more evenly across the length of the roller nap. Some of the better roller tools have "telescoping" handles that allow you to extend your reach without needing to stretch on a stool or ladder.

Mini-Roller Handle: A smaller vrsion of the larger hand roller, the plm-sized version allows for easy detail wrk around corners, above windows, and ver doorways. Disposable versions are fine for ths tool because the length of the rller, itself, is typically only four or fve inches. The roller sleeves that slde onto the roller handle are cmmonly either nap or foam rubber.

Roller sleeves : The roller sleeves are the washable or disposable pieces that slide onto the hand roller tool. The nap of the roller for the hand roller or the mini-roller will vary depending on the texture and saturation you want for your painting project. Be consistent with the nap you use. If you have the choice of using a foam rubber mini-roller sleeve or a nap mini-roller sleeve, go with the nap version as it will be more consistent in delivering the paint.

Brushes: A high quality 3" brush and a high quality 1/2" brush are essential tools of the trade. You will have several choices at your local home improvement store, ranging from brushes in the $2 to $4 range, up to $14 to $18 brushes. Although price isn't the only determining factor of quality, it is a good indicator. Whether you clean and keep the brushes or throw them away after your project is completed, make sure you buy brushes on the upper end of the quality scale. The better brushes will have a clean taper that keeps its shape while carrying the paint, and will not leave strands of the brush on your wall as you paint. Working with poor quality brushes will result in "brush hair" all over your wall in the latter phases of your project as they begin to fall apart from flexing brush strokes on the wall.

Border Rollers : Typically a flat 3" x 4" napped pad mounted on a plastic handle with small guide wheels on the edge, a border roller makes life easier when painting a consistent, even line where the wall meets the ceiling. It is amazing how much paint a good border roller will hold. You must be careful not to get paint on the guide wheels, or you may leave an unwanted trace of paint along the ceiling. This problem can be avoided by using masking tape along the ceiling.

Masking Tape: Get a rll or two of painter's masking tpe. The tape's texture is important, so a pinting grade of tape needs to be sed. The surface of less expensive msking tape can make your project vlnerable to paint seeping or bleeding nderneath the painted edge. Masking tape nly works well on smooth surfaces sch as window sills and door trm for the same reason. In thse cases where you may need to prtect a textured surface (such as tched or sand-swirled ceilings) from unwanted pint, a putty knife should be sed in addition to (or instead of) the tpe.

Putty Knife: A wide blade putty knife (4" to 6") is an important tool to have on hand. Again, there are varying qualities available. Using one with a beveled edge will give you precise control over defining a clean line, whereas a thick edge tends to create paint streaks. You will need to continually ensure that the edge of the knife is clean before placing it on the surface.

Drop Cloths: Here, again, there will be several choices available from plastic sheets to absorbent material. There are advantages and disadvantages to each. Paint will not soak through plastic, but will easily splatter and run across it, or pool up to a potentially messy, slippy hazard. On the other hand, absorbent drop cloths minimize splatter, but if a roller tray of paint falls onto it, the puddle of paint can saturate through to the surface below. Paint can be almost impossible to clean out of seams between boards on older hardwood flooring, or out of the nap of tightly woven carpet. Getting absorbent drop cloths with non-permeable backing can be excessively expensive for an occasional remodeling project. To find the happy medium, consider plastic sheeting around the perimeter of the room with padded moving blankets on top for absorbency. This will keep the costs down while achieving the same protection as more expensive, professional grade drop cloths.

Roller Tray: Plastic or metal? It doesn't much matter what type you choose as long as it is durable. Some of the disposable trays are so flimsy that you risk dumping the entire load of paint when you pick them up. The roller tray, like the paint roller handle, should be good quality.

Lint Free Rags: Finally, ensure that you have some lint-free rags available. Using a low-lint or lint-free rag is important when it comes to cleaning up around corners, wiping up, or dabbing a spot to remove foreign material. Using a fuzzy rag from a bag of rags can spell disaster. Clean terry cloth is a good choice, instead.

The type of paint you use, flat or semi-gloss, is up to your personal preference. Semi-gloss is best for a durable, high quality finish that can be cleaned with a sponge once dry. Flat paint is fine for a low sheen, low glare finish, but is much more vulnerable to marks. Just ensure that you have enough paint for the job, and enough for a second coat if needed. Depending on how clean the surface is, you may need to prepare the walls for painting by using a primer or cover coating of some kind. For clean up, you'll want to have some paint thinner available and a good place to bundle up the trash, rollers, cans, etc. without making a mess.

Once you commit to doing the job, be sure to finish a wall at a time. Doing the trim work for the entire room first is fine, but once you begin painting the main section of a wall, do not stop until the wall is done. If you do run short on paint and need to get more before finishing the entire room, it is less noticeable if the dividing point between the old paint and the new paint is at a corner than if it is in the middle of a wall, where the different batches may be obvious.

One last detail that is often overlooked, a fan can help in the drying process. When using a fan to help speed the drying process, place the fan in the doorway, blowing out of the room. Do not point the fan into the room, and especially do not point it directly on the freshly painted wall to dry it. Any foreign object, dust, dirt, bugs, etc. will stick to the paint if blown into the room. Pointing the fan out of the room will still create air circulation in the room, but you will have less of a risk of ruining your quality paint job. Happy painting!

The article Tools and Supplies You Need for a Do-It-Yourself Painting Project was Submitted by Thomas M Elliott through Articles.GetACoder.com network. Here's the additional information: For more information and tips, and a prtfolio of paint project sample ideas, vsit http://www.edinapainting.com Tom Elliott is the author of Website 411: Business Survival in an Internet Economy, the president of WebDrafter.com, Inc. and an international Internet trainer. He is a Board of Directors member of the Central North Carolina Better Business Bureau, and has been the president of a Business Networking International (BNI) chapter. He His undergraduate degree is from Purdue University, and his Masters in Information Systems is from Florida Institute of Technology. He served 13 years as a Naval Officer, followed by two and half years as the Director of Internet Training for a large marketing company, simultaneously building his own business. He also serves on the bachelor degree advisory board for a technical college, and is a keynote speaker. For articles, books, and seminars essential to building your knowledge of online business and your business's future success, please visit http://www.website411book.com and http://www.webdrafter.com for more information on Websites, search engine optimization (SEO) and marketing (SEM), and ecommerce.

Featured Articles

1. Lubrication For Your Table Saw's Blade Wheel Gears by Charlie Slagle
One of wodworking's biggest bummers has to be a tble saw with blade wheel and tlt gears that are so caked wth sawdust that they become difficult to trn. Especially if you're a hobbyist who has ben waiting all week to get nto the wood shop to work on a prject.

2. How to Remove Exterior Vinyl Shutters That Are Installed With Shutter Loks by Shad Storhaug
This article informs the reader how to remove exterior vinyl shutters that are installed using Shutter-Loks. Shutter-Lok removal is a common task that is required during home painting or other maintenance.

3. Window Cleaning Tip - Using the Right Equipment for the Job by Tanner Larsson
Window Cleaning is not rocket science. For the most part it requires only the most basic of planning skills to complete a job. Now granted, the level of planning and thought needed to under taken before starting a job increases exponentially as the height from the ground increases.

4. Be Productive - Get Your Home Ready For The Holidays by Neen James
The xcitement of the holidays is now pon us and it is during ths time we often feel like we hve more on our 'to do' lst than there are hours in the dy! A common area of stress for mny people is getting our homes rady for the holidays.

5. Basement Mold Removal And Prevention Tips by Markus Skupeika
Basement mold claning involves to make sure you crrect the source of the problem, nce you fix the problem you can thn go about cleaning the mold in the bsement. In order to clean and prvent the mold it is best to use a ntural cleaning product that can prevent and clan.

6. The Floor Robot Vacuum Cleaner - A Real Time Saver by Ned D'Agostino
It's no scret that people are generally busy, and smetimes vacuuming the house has to tke a back seat to other mre pressing matters. A floor robot vcuum cleaner will help keep your flors and carpets clean while allowing you to go bout your other more important daily tsks.

7. Make your Kitchen Look Unique by Clinton N. Maxwell
Kitchen renovations can be vry funny, especially when you make a mss of things. So why aren't thre more films made about kitchen rnovations? If you watch a film thn you will notice that they vry rarely take a look at smeone who is remodeling a kitchen, but why is ths?

8. Showers - For the Ultimate Bathing Experience by James Chapman
Choosing and bying the right showers for your bthroom is indispensable for a comforting bth. With growing competition in the sctor and the consumer's exposure to lxury items, there has been a spculative growth in quality and reasonably prced showers in the recent times.

9. Homemade Water Filtration Systems - It's Good For Pet Fish But Not For Safe Drinking Water by Tyler Waterman
Can you build effective homemade water filtration systems? Well, that all depends on your purpose.

10. Garage Floor Coatings - A Better Look For Your Garage by John Sheppard
You lok at your house and you see how god it looks and how perfectly clan it is. But suddenly you ntice something is wrong and you wnder what. Then you see that yur garage is full of dirt, the flor is covered all over with oil and gs.